Download latest version
Showing posts with label windows 7. Show all posts
Showing posts with label windows 7. Show all posts
Windows anytime upgrade keys
Windows anytime upgrade
Are you having windows 7 then now its possible to upgrade your version of windows to your required version its just simple.Follow the procedure given below and now you can upgrade your windows
1. First Connect Your PC to Internet.
2. Then go to your Control Panel and click on Windows Anytime Upgrade
3. Here you will get a window asking your anytime upgrade keys
4. Just copy paste this keys
according to your version and click next
5. Then it will verify saying its ok
, click on next button
6. A new window will open saying it
may take few minute
7. After few minute it will say your
keys not working or something
8. Just close the windows and restart
your PC and see the magic.
Widnows 7 Home
Premium: 6RBBT-F8VPQ-QCVPQ-KHRB8-RMV82
Windows 7
Professional: VTDC3-WM7HP-XMPMX-K4YQ2-WYGJ8
6RQ9V-6GCG4-8WV2H-966GF-DQ4DW
32KD2-K9CTF-M3DJT-4J3WC-733WD
Windows 7 Ultimate:
FJGCP-4DFJD-GJY49-VJBQ7-HYRR2
342DG-6YJR8-X92GV-V7DCV-P4K27
Dual Boot Your Pre-Installed Windows 7 Computer with XP
Dual Boot Your Pre-Installed Windows 7 Computer with XP
So you got your shiny new pre-installed Windows 7 computer over the holidays, but you want to have trusty XP standing by in a dual boot setup. Today we’ll walk through creating a new partition in Windows 7 then installing XP on it.
In this process we are going to shrink some free space on the Windows 7 hard drive to allocate toward a new partition. Make sure to take a moment and decide how much space to use for the XP partition. Make sure you have enough space on your hard drive for files you’ll be adding to each.
Create a New Partition
The first thing we need to do is create a new partition on the Windows 7 machine. Luckily we can do it without any 3rd party software. To begin, click on Start and type eitherpartition or disk management into the search box and at the top of the menu click onCreate and format hard disk partitions.
![sshot-2010-01-06-[20-36-31]](https://lh3.googleusercontent.com/blogger_img_proxy/AEn0k_sH6cWrie23TCSPFX5PJcFQtT5wHgnAV_gt3nz-nHDLTwMF5hR8SP4hB-LtfZR1bO3jPASKah18gfgzVrmm2Of1cVlPZOo9BPG3FYORPZjjxh269cXEZFXUD9Pz0P6a1nblsSRpEnfyHk9HQ5Sh=s0-d "sshot-2010-01-06-[20-36-31]")
The Disk Management window opens, and from here we need to free up space on the (C:) drive Windows 7 is installed on. Right-click on the drive and select Shrink Volume.
A window pops up showing the drive is being queried for available space.
Now enter the amount of space you want to shrink the volume. You’re shown the total size of the disk and the amount of size that is available to shrink. In this example we’re freeing up 40GB of space.
After the process completes you’ll see the new Unallocated space. Right-click that and select New Simple Volume.
The New Simple Volume Wizard launches which is a straight forward process. When you get to the Format Partition section, NTFS is selected by default as the file system and you can leave that as is. You might want to rename the Volume label something else like “XP Partition” so it’s easier to identify when installing XP. Also you’ll probably want to make sure to check Perform a Quick Format.
After the format is complete you will see the new volume as a healthy partition listed.
Now when you go into My Computer you’ll see the the new disk and notice that space has been taken away from the (C:) drive Windows 7 is installed on.
Install XP on the New Partition
Now that you know how to create a new partition on your Windows 7 machine, it’s time to install XP on it. Here we’re installing XP Professional on the new partition. Boot from the XP installation disk and start the install process.
When it comes to choosing a partition, make sure you select the one you created using the steps above. In this example we made a 10GB partition for the XP install.
If the partition you created was already formatted as NTFS you can leave it, or you can choose the FAT file system if you want.
Basically you continue through as if you were doing a clean install on any hard drive.
Create Boot Loader
Once installation of XP is successful you can now go through and install the latest Microsoft Updates and drivers. You will undoubtedly notice that the machine is booting directly into XP at this time. This is due to XP writing it’s bootloader over Windows 7’s. To get both XP and Windows 7 as an option at the boot screen you can use the free utility EasyBCD 1.72 or their new 2.0 Beta.
![sshot-2010-01-04-[23-04-48]](https://lh3.googleusercontent.com/blogger_img_proxy/AEn0k_sgHoFwfTy5Bjxt2iBkhmQ0WuCjkpEfDC-ugD17pHiDG_7uuXbb8coERse-L26S7iPmjc2UWNi6FbS-6-E-oQSrYDJejRI2dn2Wrz4QoL8h2mhbWfMUY_8Ck5XVcaPAH3G8S6ZFa-oVtCthfZ1N5g=s0-d "sshot-2010-01-04-[23-04-48]")
After getting the bootloader back you should see both XP and Windows 7 as options in the Windows Boot Manager.
Installing c in windows 7 32bit & 64bit
IF U HAVE ANY PROBLEM IN COMPILING UR PROGRAMS DO THIS
IF U HAVE ANY PROBLEM IN COMPILING UR PROGRAMS DO THIS
Download DOSBOX From here Dosbox Then extract it and install. Download Turboc30 files here Turboc30 Extract these files to your Local Disk "C"
Goto start and type dos and you will see DOSBox 0.74 Options
Click on DOSBox 0.74 Options
Goto last line of note pad you will see
[autoexec]
# Lines in this section will be run at startup.
# You can put your MOUNT lines here.
Type
MOUNT C C:\TURBOC30
c:
\BIN\TC
Below those lines and click ctrl+s and exit.....
Now run DOSBox your "C" will launch on DOSBox..........................
Subscribe to:
Posts (Atom)